Use this gun to apply chinking or caulking from 5 gallon containers. Reinforced welded construction; heavy gauge steel with smooth durable finish; quality screw-on caps with rolled threads for tighter seal. Made in USA. Chamber size is 1 quart, comes with 1/2" nozzle, all metal construction and zinc-plated for corrosion resistance.   Other nozzles also available (as shown).

2" x 18" barrel
375 lbs. force generated
Great for high volume work

Use this gun with the Follow Plates, shown below, to keep the sides of the gun clean during "loading" of the chinking. Can also be used with the bulk loaders.

Extra nozzles are optional and priced as follows:

• 1/8 inch round      $6.50
• 1/4 inch round      $4.50
• 1/2 inch round      $2.50
• 1 inch slotted       $8.50
• 1-1/2 inch slanted $15.50
• 2-1/2 inch slotted  $16.50

Note: Slotted and slanted are approximately 1/8" opening by the width specified. The Slanted is also at a slight angle (like a sash brush).

Air-powered drive discharges material at high-speed and large volume.
All metal construction, scratch and rust resistand.
High-quality 3 way air valve for instant pressure release
Replaceable parts.
Accepts a standard 1/8" NPT male fitting.

Note: Unlike paint spray guns, caulking guns use a very small volume (cfm) of air. For this reason they can be operated using bottled pressurized gas.
The recommended dispensing pressure for most materials is less than 60 psi. (Air Powered models are designed to operate at up to 125 psi.
Filtered air will increase the life of the tool.

Use this gun with the Follow Plate, shown below, to keep the sides of the gun clean during "loading" of the chinking.

Generates 120 psi of pressure

Extra nozzles are optional and priced as follows:

• 1/8 inch round      $6.50
• 1/4 inch round      $4.50
• 1/2 inch round      $2.50
• 1 inch slotted       $8.50
• 1-1/2 inch slanted $15.50
• 2-1/2 inch slotted  $16.50

Note: Slotted and slanted are approximately 1/8" opening by the width specified. The Slanted is also at a slight angle (like a sash brush).

Nozzles
cc0002-nozzle

Fit the Albion manual bulk loading and air bulk loading guns shown above.

1/8" round         1/4"  round         1/2" round         1" slotted

1/8" round                 $6.50
1/4" round                 $4.50
1/2" round                 $2.50
1" slotted                  $8.50
1-1/2" slotted/slanted $15.50
2-1/2" slotted             $16.50

6" extension can be used with the 1/8", 1/4", and 1/2" nozzles shown above to get into tight spots.

1" x 1/8" slotted cartridge nozzle screws onto plastic tip of quart size cartridges...very usful.  $5.05

Replacement Piston Kits for Albion Manual and Air Bulk loading guns shown above. With use, these piston cups/kits wear out.

 styles:

• Leather -This is how the guns are originally set up. Comes with 2 piston cup packings, 3 washers, 1 nut
  
• Nitrile - Probably best for water based products as they won't expand with use. Comes with 2 piston cup packings, 2 washers, 1 nut.
• Teflon - This is the elite version...teflon to the front, leather to the back...good for more abrasive "textured" caulks/chinks.
  

Note: Regarding Leather Piston Cups...For longest life, periodically remove the cups from the gun, clean, lubricate with 10 wt. motor oil and replace. DONOT soak in water as they will expand to the point you won't be able to reinstall...they're a lot of fun to get back in the barrel as it is...NOT.

Nitrile Kit

Teflon kit

The following caulking guns are for tubes of chinking or caulking.

Deluxe caulking guns are for professional/repetitive use and worth the investment in saved aggravation.

30 oz. deluxe $39.99
Quart w/ Metal Frame.
Material Type Material Packaged in Quart CartridgesCapacity QuartDrive Type DeluxeForce or Pressure Generated 375 lbs Force

11 oz. deluxe $32.75
Description 1/10 Gallon Cartridge Gun w/ Metal Carriage. For the user that wants all the features of a Professional Tool but doesn't need maximum durability.

New and improved version includes heavier square smooth drive rod that can be rotated 4 times for longer life, Double Gripping Plates and a Puncture Wire for cartridges.

Material Type Powerful enough for any material packaged in cartridges; Silicone, Polyurethane, Acrylic, Butyl, Terpolymers, MS, etc.

2 x 10 barrel length, 375 lbs force generated

Economy gun fits all small 10-11 oz. tubes of caulking and chinking and should get you through the job
11 oz. economy $2.99

Nozzles

Nozzles fit both the Standard Deluxe and Air bulk that are shown above. The 1/2" round comes as a standard item with either gun.

Extra nozzles are optional and priced as follows:

• 1/8 inch round      $  6.50
• 1/4 inch round      $  4.50
• 1/2 inch round      $  2.50
• 1 inch slotted       $  8.50
• 1-1/2 inch slanted $15.50
• 2-1/2 inch slotted  $16.50

Note: Slotted and slanted are approximately 1/8" opening by the width specified. The Slanted is also at a slight angle.

Note: The minimum recommended bead with for caulking is 1/4". Use the 1/8" to get into hard to reach places.

Spatulas for Chinking and Caulking

Useful for spreading and smoothing chinking.

These are actually artists oil paint tools that are flexible and work well. Flexible...particularly #112 and #118.

3 sizes available. Still flexible, however not as much as the Italian ones shown above. These are commonly used by professionals.

#4 3/4" x 7-3/4"  - $7.95
#6 1" x 10-1/2"   - $10.95
#10 1-1/2" x 15" - $21.95

Turn Your Drill into a Powerful, Easy to Operate, Industrial Caulking Gun
� Attaches in seconds to any cordless or variable speed AC drill
� No air lines required (allows for complete portability)
� Dispenses the most rugged Adhesives, Sealants and Caulks with the touch of a trigger
� Patented design for instant pressure release and quick reload
� Two year warranty
� Made in U.S.A.

Fits 29-30 oz. large size tubes

Fits 10-1/2 to 11 oz. small size tubes

Follow Plates and Bulk Loaders

Used to make the job go faster and cleaner. If you're a professional that does chinking and caulking on a regular basis, you'll find these are money making additions to your equipment.

Fits inside bucket. Speeds bulk loading.

DIRECTIONS: 

• open pail and place Follow Plate directly on top of material (after mixing, if necessary). 
• Press it down firmly to eliminate air pockets. 
• Remove front cap from gun and advance the rod as far forward as it will go. 
• Thread the gun into the Plate. 
• While exerting pressure down onto the plate, pull back on the rod to fill the gun. 
• When full, unthread the gun and replace the cap and nozzle on the gun. 
• Cover the opening on the follow plate with a piece of plastic to limit curing between fills.

Sheet metal, no seal, 10 7/8" diameter
Use this type for:

• Sashco Log Jam
• Sashco Log Builder 

Tapered with Nitrile Seal

Sheet metal, with Nitrile seal around perimeter.
10 7/8" diameter
Use this type for:

• PermaChink
• Weatherall
• FMI 

These loaders will quickly and (more) easily fill your bulk loading guns.
Available in either a pump style or a screw type loader.
The loaders listed here are for plastic buckets. If you need a loader for straight or tapered sided metal buckets, then Contact Us. 

Caulking Gun Loaders

� Save Time--The loader eliminates hand or paddle loading of your caulking gun or cartridge. With the loader, you'll fill your caulking gun or cartridge in seconds.

� Save Money--The loader assures complete use of all the materials in your pail; dried-out, skimmed-over and wasted materials are prevented. Fast mechanical loading eliminates time-consuming hand loading of your caulking gun or cartridge, which results in savings of costly labor.

� Cleaner--No air pockets are possible in your caulking gun or cartridge because the Force-Flo air-tight piston seal assures a smooth, uninterrupted flow of material from the pail to the caulking gun and cartridge.

For 5-gal. plastic pails, straight and taped sides...with 2" diameter screw cap (Albion guns and others). Recommended for light to medium viscosity materials: caulking, chinking, fire stopping, adhesives, etc. For filling bulk caulking guns.

More suitable for Sashco Log Jam and PermaChink type Chinking and Caulking Products.

Caulking gun cylinder attaches to outlet adaptor. About four full strokes of lever delivers a pound of material.

Designed to fit 5 gallon pail and 2" diameter screw cap guns...such as the Deluxe Bulk Loading and Air Gun above.

Particularly recommended for thick/heavy chinking products such as Weatherall 1010. Chinker's Edge (Sashco), and for professionals who need the longevity and durability of a screw type loader.
Five times the power of standard loaders; quickly transfers high viscosity materials from pail to gun
Quick-release split-nut mechanism allows loader to be removed from empty pail in seconds--no tedious "backing out" needed
Steel base plate lets operator stabilize pail while loading